MSB M500

MSB omdefinerte sine ideer om hva en forsterker skal være, og bygger M500 med en helt modulær design sammen med et matchet impedansinngangstrinn. 500-seriens forteller alt om hva MSB er istand til å lage av et High-End produkt.

 

The M500 Mono Amplifier

(per mono amplifier)

Static Power Consumption 150 Watts On
Standby power less than 2 watts
Operating Voltage Range 100V or 105-130V/210-260V configured at the factory.
Fuse 1/4″x1-1/4″ 15A 250V Slow Blow
Input 1x XLR Input
Output 2x Binding post set per channel
Controls Gain switch
Input Impedance Switch
On/Off Button
Standby button
Display Dimmer
12V Mode Switch
2x MSB 12V trigger port
Continuous Power Output (8Ω) < 1% distortion 500 W
Continuous Power Output (4Ω) < 1% distortion 1000 W
 
Frequency Response (20 to 20kHz) ±0.025dB
Signal to Noise (20 to 22kHz) >136dB (>140dBA)
Equivalent Input Noise (22kHz BW) 0.5μV
 
Low Gain (75Ω source impedance) 16.4dB
Medium Gain (75Ω source impedance) 22.4dB
High Gain (75Ω source impedance) 28.4dB
Input Impedance (User Selectable) 75Ω / 300Ω / 1.2kΩ
Output Impedance (20 to 20kHz) 0.07Ω
Topology
Input/Gain Stage – Class-A
– Quad balanced
– Impedance matched
– Transformer coupled
– Fully discrete
– Independent power and transformer
Output Stage – Class-AB
– Balanced
– High bias
– Current gain only
Chassis Dimensions (Per Mono Block)
Width: 15 in (381 mm)
Depth: 23.25 in (590 mm)
Height: 10.5 in (267 mm) Without Feet
11 in (279 mm) With Feet
Weight: 135 lbs (61.25 kg)
Product Feet: M6X1 Thread
3 or 4 Foot Configuration
Shipping Dimensions (Per Mono Block)
Width: 23 in (585 mm)
Depth: 35 in (889 mm)
Height: 21 in (534 mm)
Weight: 194 lbs (88 kg)
Included Accessories
User Manual
IEC C19 Power Cord
4X Rubber Feet

 

Kr. 1.500.000.- pair

NYHETER